The Zego thermostat has four different system modes:

  • Auto - this mode has both a heating and cooling set-point. When the temperature goes below the heating set-point, the system will begin heating until the temperature is back above the set-point. If the temperature goes above the cooling set-point, the system will begin cooling until the temperature goes below the set-point. Essentially, you are setting a range of temperatures within which you are comfortable.
  • Heat - this mode has one heating set-point. If the temperature goes below that set-point, the system will begin heating until the temperature is back above the set-point.
  • Cool - this mode has one cooling set-point. If the temperature goes above the cooling set-point, the system will begin cooling until the temperature goes below the set-point.
  • Off - this mode turns the HVAC system completely off.

The change the system mode, follow these steps:

  1. Open the Zego Mobile app.
  2. Click "Go" next to the Thermostat device on the unit home screen to go to the Thermostat device screen.
  3. On the thermostat screen, click on the current system mode (e.g., Auto, Heat, Cool, Off) to open the system mode menu.
  4. Select the system mode you would like to set the thermostat to use.

Did this answer your question?